- CVI 정보나눔(www.cvi.kr)
- 스터디
- 질문답변
질문,답변
글 수 1,629
답변 잘 봤았습니다.
지난번에도 답변을 달아주셔서 감사했습니다.
현호 님이 올린 예제의 경우 NI의 보드를 사용하신걸로 보이고,
NI에서 제공하는 SDK를 이용해서 작업한걸로 보입니다(img 로 시작하는 함수들을 쓰신걸 보고 확인했습니다)
제 경우는 NI 보드를 쓰는것이 아니고 NI 함수를 사용하지 않기에 CVI의 표준함수를 사용해서 Display 하려고 하는 중입니다.
다시한번 답변주신것 감사드립니다
>안녕하세요.
>예전에 비슷한 질문이 있어서 올렸던 답변을 다시 올립니다.
>관련 예제를 보시면 Grap이라는 셈플이 있을텐데요.
>아무쪼록 성공하시길 바랍니다. ^^
>=================================================================
>
>NI사의 NI PCI-1411그래버 보드를 사용하였을 때의 제가 사용한 예제 입니다.
>
>[Grab]버튼을 누르면 설정을 마치고 영상을 얻어오는 타이머를
>
>Enable시킵니다. 영상을 얻는 부분은 timer함수에 있습니다.
>
>Picture가아닌 CANVAS를 사용하셔야 합니다.
>
>예제가 있던 걸로 기억합니다만...^^
>=================================================================
>
>int CVICALLBACK Grab (int panel, int control, int event,
> void *callbackData, int eventData1, int eventData2)
>{
> char intfName[64];
> unsigned long bitDepth;
>
> switch (event)
> {
> case EVENT_COMMIT:
>
> // Get the interface name
> GetCtrlVal(panelHandle, PANEL_STRING_INTFNAME, intfName);
>
> //Open an interface and a session
> imgInterfaceOpen(intfName, &Iid);
> imgSessionOpen(Iid, &Sid);
>
> // Check that the Acquisition window is not smaller than the Canvas
> imgGetAttribute(Sid, IMG_ATTR_ROI_WIDTH, &AcqWinWidth);
> imgGetAttribute(Sid, IMG_ATTR_ROI_HEIGHT, &AcqWinHeight);
>
> if(CanvasWidth < AcqWinWidth)
> AcqWinWidth = CanvasWidth;
> if(CanvasHeight < AcqWinHeight)
> AcqWinHeight = CanvasHeight;
>
> // Set the ROI to the size of the Canvas so that it will fit nicely
> imgSetAttribute(Sid, IMG_ATTR_ROI_WIDTH, AcqWinWidth);
> imgSetAttribute(Sid, IMG_ATTR_ROI_HEIGHT, AcqWinHeight);
> imgSetAttribute(Sid, IMG_ATTR_ROWPIXELS, AcqWinWidth);
>
> // Set the plot Flag depending on the bitDepth
> imgGetAttribute(Sid, IMG_ATTR_BITSPERPIXEL, &bitDepth);
>
> switch(bitDepth)
> {
> case 10:
> PlotFlag = IMGPLOT_MONO_10;
> break;
> case 12:
> PlotFlag = IMGPLOT_MONO_12;
> break;
> case 14:
> PlotFlag = IMGPLOT_MONO_14;
> break;
> case 16:
> PlotFlag = IMGPLOT_MONO_16;
> break;
> case 24:
> case 32:
> PlotFlag = IMGPLOT_COLOR_RGB32;
> break;
> default:
> PlotFlag = IMGPLOT_MONO_8;
> break;
> }
>
> // Setup and launch the grap operation
> imgGrabSetup(Sid, TRUE);
>
> //Let NI-IMGQ manage the memory
> ImaqBuffer = NULL;
>
> //Activate the IMAQ loop
> SetCtrlAttribute(panelHandle, PANEL_TIMER_VISION, ATTR_ENABLED, TRUE);
>
> break;
> }
> return 0;
>}
>
>/***********************************************************/
>/* */
>/* TIMER */
>/* */
>/***********************************************************/
>
>int CVICALLBACK Imaq_loop (int panel, int control, int event,
> void *callbackData, int eventData1, int eventData2)
>{
> static int nbFrame;
> static float t1, t2;
>
> switch (event)
> {
> case EVENT_TIMER_TICK:
>
> t2 = Timer();
>
> // Get the frame after the next Vertical Blank
> imgGrab(Sid, (void **)&ImaqBuffer, TRUE);
>
> // Display using NI_IMAQ
> imgPlot(CVIWndHndl, ImaqBuffer, 0, 0, AcqWinWidth, AcqWinHeight, CanvasLeft, CanvasTop, PlotFlag);
>
> // Calculate the number of frame per seconds every 10 frames
> nbFrame++;
> if(nbFrame > 10)
> {
> SetCtrlVal(panelHandle, PANEL_NUM_FRAMERAE, nbFrame/(t2-t1));
> t1 = t2;
> nbFrame=0;
> }
>
> break;
> }
> return 0;
>}
>======================================================================
>
>>
>>안녕하세요.
>>도움을 얻고자 이곳에 글을 올렸습니다.
>>
>>현재 제가 하고 있는일은 CCD 구동 프로그램을 CVI를 사용하여 만들어서 나오는 영상을 CVI의 panel 에 나타나도록 구현하고자 하고 있습니다.
>>(판넬에 picture 가 들어갈수 있도록 uir을 제작하였습니다)
>>
>>현재 데이터를 얻는 것까지는 어떻게 해결했는데 이것을 CVI 판넬에 표현하는 일이 잘 되질 않고 있습니다.
>>CCD에서 얻어지는 데이터가 16비트 데이터라서 8비트로 변환까지 해 두었는데, 이것을 CVI를 통해서 display 하는데 곤란을 겪고 있습니다.
>>
>>샘플들을 보다보니, bitmapID 라는 것이 계속 쓰이는 것 같아서
>>NewBitmap 함수를 사용해서 bitmapID를 만들고자 하는데(이걸쓰면 CCD에서 얻어진 데이터에 대해서 bitmapID를 줄 수 있을것 같습니다),
>>이 함수에 들어가는 인자 중에서 colortable, bits, mask 에 어떤 것들이 들어가는지 잘 모르겠습니다.
>>이 인자들에 대한 설명과, 어떤 식으로 써야 할지 조언해 주시면 고맙겠습니다.
>>답변 부탁드립니다.
>
지난번에도 답변을 달아주셔서 감사했습니다.
현호 님이 올린 예제의 경우 NI의 보드를 사용하신걸로 보이고,
NI에서 제공하는 SDK를 이용해서 작업한걸로 보입니다(img 로 시작하는 함수들을 쓰신걸 보고 확인했습니다)
제 경우는 NI 보드를 쓰는것이 아니고 NI 함수를 사용하지 않기에 CVI의 표준함수를 사용해서 Display 하려고 하는 중입니다.
다시한번 답변주신것 감사드립니다
>안녕하세요.
>예전에 비슷한 질문이 있어서 올렸던 답변을 다시 올립니다.
>관련 예제를 보시면 Grap이라는 셈플이 있을텐데요.
>아무쪼록 성공하시길 바랍니다. ^^
>=================================================================
>
>NI사의 NI PCI-1411그래버 보드를 사용하였을 때의 제가 사용한 예제 입니다.
>
>[Grab]버튼을 누르면 설정을 마치고 영상을 얻어오는 타이머를
>
>Enable시킵니다. 영상을 얻는 부분은 timer함수에 있습니다.
>
>Picture가아닌 CANVAS를 사용하셔야 합니다.
>
>예제가 있던 걸로 기억합니다만...^^
>=================================================================
>
>int CVICALLBACK Grab (int panel, int control, int event,
> void *callbackData, int eventData1, int eventData2)
>{
> char intfName[64];
> unsigned long bitDepth;
>
> switch (event)
> {
> case EVENT_COMMIT:
>
> // Get the interface name
> GetCtrlVal(panelHandle, PANEL_STRING_INTFNAME, intfName);
>
> //Open an interface and a session
> imgInterfaceOpen(intfName, &Iid);
> imgSessionOpen(Iid, &Sid);
>
> // Check that the Acquisition window is not smaller than the Canvas
> imgGetAttribute(Sid, IMG_ATTR_ROI_WIDTH, &AcqWinWidth);
> imgGetAttribute(Sid, IMG_ATTR_ROI_HEIGHT, &AcqWinHeight);
>
> if(CanvasWidth < AcqWinWidth)
> AcqWinWidth = CanvasWidth;
> if(CanvasHeight < AcqWinHeight)
> AcqWinHeight = CanvasHeight;
>
> // Set the ROI to the size of the Canvas so that it will fit nicely
> imgSetAttribute(Sid, IMG_ATTR_ROI_WIDTH, AcqWinWidth);
> imgSetAttribute(Sid, IMG_ATTR_ROI_HEIGHT, AcqWinHeight);
> imgSetAttribute(Sid, IMG_ATTR_ROWPIXELS, AcqWinWidth);
>
> // Set the plot Flag depending on the bitDepth
> imgGetAttribute(Sid, IMG_ATTR_BITSPERPIXEL, &bitDepth);
>
> switch(bitDepth)
> {
> case 10:
> PlotFlag = IMGPLOT_MONO_10;
> break;
> case 12:
> PlotFlag = IMGPLOT_MONO_12;
> break;
> case 14:
> PlotFlag = IMGPLOT_MONO_14;
> break;
> case 16:
> PlotFlag = IMGPLOT_MONO_16;
> break;
> case 24:
> case 32:
> PlotFlag = IMGPLOT_COLOR_RGB32;
> break;
> default:
> PlotFlag = IMGPLOT_MONO_8;
> break;
> }
>
> // Setup and launch the grap operation
> imgGrabSetup(Sid, TRUE);
>
> //Let NI-IMGQ manage the memory
> ImaqBuffer = NULL;
>
> //Activate the IMAQ loop
> SetCtrlAttribute(panelHandle, PANEL_TIMER_VISION, ATTR_ENABLED, TRUE);
>
> break;
> }
> return 0;
>}
>
>/***********************************************************/
>/* */
>/* TIMER */
>/* */
>/***********************************************************/
>
>int CVICALLBACK Imaq_loop (int panel, int control, int event,
> void *callbackData, int eventData1, int eventData2)
>{
> static int nbFrame;
> static float t1, t2;
>
> switch (event)
> {
> case EVENT_TIMER_TICK:
>
> t2 = Timer();
>
> // Get the frame after the next Vertical Blank
> imgGrab(Sid, (void **)&ImaqBuffer, TRUE);
>
> // Display using NI_IMAQ
> imgPlot(CVIWndHndl, ImaqBuffer, 0, 0, AcqWinWidth, AcqWinHeight, CanvasLeft, CanvasTop, PlotFlag);
>
> // Calculate the number of frame per seconds every 10 frames
> nbFrame++;
> if(nbFrame > 10)
> {
> SetCtrlVal(panelHandle, PANEL_NUM_FRAMERAE, nbFrame/(t2-t1));
> t1 = t2;
> nbFrame=0;
> }
>
> break;
> }
> return 0;
>}
>======================================================================
>
>>
>>안녕하세요.
>>도움을 얻고자 이곳에 글을 올렸습니다.
>>
>>현재 제가 하고 있는일은 CCD 구동 프로그램을 CVI를 사용하여 만들어서 나오는 영상을 CVI의 panel 에 나타나도록 구현하고자 하고 있습니다.
>>(판넬에 picture 가 들어갈수 있도록 uir을 제작하였습니다)
>>
>>현재 데이터를 얻는 것까지는 어떻게 해결했는데 이것을 CVI 판넬에 표현하는 일이 잘 되질 않고 있습니다.
>>CCD에서 얻어지는 데이터가 16비트 데이터라서 8비트로 변환까지 해 두었는데, 이것을 CVI를 통해서 display 하는데 곤란을 겪고 있습니다.
>>
>>샘플들을 보다보니, bitmapID 라는 것이 계속 쓰이는 것 같아서
>>NewBitmap 함수를 사용해서 bitmapID를 만들고자 하는데(이걸쓰면 CCD에서 얻어진 데이터에 대해서 bitmapID를 줄 수 있을것 같습니다),
>>이 함수에 들어가는 인자 중에서 colortable, bits, mask 에 어떤 것들이 들어가는지 잘 모르겠습니다.
>>이 인자들에 대한 설명과, 어떤 식으로 써야 할지 조언해 주시면 고맙겠습니다.
>>답변 부탁드립니다.
>